| |
| |
-
AATC 2011 - Basic ATC Lab
A practical introduction to the role that Air Traffic Control plays in the operation of the National Airspace System. The core activity of this lab will involve flying with a flight instructor to see and hear ATC interactions first hand while performing a variety of flight operations. Lab 1. Corequisite(s): AATC 2013 (Fall) (This lab is not required if the student has obtained their FAA Private Pilot Certificate.)
|
| |
|
| |
-
AATC 2411 - ATC Tower Operation Lab
This lab is a practical, simulation-based study of control tower operations including the various controller positions and responsibilities. Lab 2. Corequisite(s): AATC 2413 (Fall)
|
| |
-
AATC 2413 - ATC Tower Operations
This course provides a comprehensive study of tower operations including ground separation, team responsibilities, and regulations. Class 3. Prerequisite(s): AATC 2013 . Corequisite(s): AATC 2411 (Fall)
|
| |
-
AATC 3101 - Air Traffic Radar Systems Lab
This lab is a practical, simulation-based study of the radar systems used by air traffic controllers to manage aircraft in the airspace system. Lab 2. Corequisite(s): AATC 3103 (Spring)
|
| |
-
AATC 3103 - Air Traffic Radar Systems
This course provides a comprehensive study of the work accomplished at an ATC radar facility. Attention given to procedures, an understanding of the various types of equipment used and airspace considerations. Class 3. Prerequisite(s): AATC 2413 . Corequisite(s): AATC 3101 (Spring)
|
| |
-
AATC 3311 - Advanced ATC Lab
This lab is a simulation-based comprehensive experience from both the control tower and radar perspective. Students work more difficult scenarios in a team environment. Lab 2. Corequisite(s): AATC 3313 (Summer)
|
| |
-
AATC 3313 - Advanced ATC
This course serves as a capstone experience where students synthesize the various components of the ATC system as a basis for a study of advanced concepts. A comprehensive review in preparation for the FAA’s AT Basics exam. Class 3. Prerequisite(s): AATC 3103 . Corequisite(s): AATC 3311 (Summer)
|
| |
-
AATC 4213 - Air Traffic Resource Management
This course is a comprehensive study of the teamwork needed within the ATC System to run the National Airspace System. This course will also include discussion on human factors, workforce and staffing issues. Class 3. Prerequisite(s): AATC 3313 . (Fall)
|
| |
-
ACCT 2103 - Principles of Financial Accounting
An introduction to the accounting process, with emphasis on (1) gathering, classifying, and reporting information on financial statements and (2) understanding the importance of financial statements in economic decision making. Class 3.
|
| |
-
ACCT 2113 - Principles of Managerial Accounting
An introduction to business decision-making with an emphasis on how to provide appropriate relevant accounting information to economic decision making. Class 3. Prerequisite(s): ACCT 2103 .
|
| |
-
ACCT 3103 - Intermediate Accounting I
A comprehensive study of the concepts, principles, and practices of modern financial accounting, with emphasis on the recognition and measurement of assets and liabilities. Class 3. Prerequisite(s): ACCT 2103 .
|
| |
-
ACCT 3113 - Intermediate Accounting II
A continuation of ACCT 3103 with emphasis on issues relating to stockholders’ equity, dilutive securities, investments, and the measurement of income. Class 3. Prerequisite(s): ACCT 3103 .
|
| |
-
ACCT 3123 - Intermediate Financial Accounting I
A comprehensive study of the concepts, principles, and practices of financial accounting topics related to preparing and interpreting financial statements that comply with generally accepted accounting principles. In-depth study of the Income Statement, Balance Sheet, and recognition and measurement of current assets. Class 3. Prerequisite(s): ACCT 2103.
|
| |
-
ACCT 3133 - Intermediate Financial Accounting II
Continuation of Intermediate Financial Accounting I ACCT 3123 . In-depth study of recognition and measurement in accordance with generally accepted accounting principles of long-term assets, liabilities, stockholders’ equity, and the preparation and interpretation of the Statement of Cash Flows. Class 3. Prerequisite(s): ACCT 3123.
|
| |
-
ACCT 3203 - Governmental and Nonprofit Accounting
An introduction to the principles and classifications of fund accounting as recommended by the Governmental Accounting Standards Board, to include both governmental units and other nonprofit organizations. Class 3. Prerequisite(s): ACCT 2103 .
|
| |
-
ACCT 3303 - Cost Accounting
The concepts and purposes underlying the developing and reporting of cost accounting information are studied. Topics include job order costing, process costing, standard cost systems, variance analysis, and a variety of business decision-making models. Class 3. Prerequisite(s): ACCT 2113 .
|
| |
-
ACCT 3323 - Cost Accounting Foundations
This course builds on the managerial accounting course ACCT 2113. The course provides a thorough study of traditional and contemporary approaches to cost accounting, cost management and cost control. Class 3. Prerequisite(s): ACCT 2113.
|
| |
-
ACCT 3403 - Federal Income Tax
An introduction to federal income tax laws and regulations, the determination of income tax liabilities, and the preparation of tax returns. Class 3. Prerequisite(s): ACCT 2103 .
|
| |
-
ACCT 3423 - Principles of Taxation
An introduction to federal income tax laws and regulations for individuals, partnerships and corporations. Class 3. Prerequisite(s): ACCT 2103.
|
| |
-
ACCT 3503 - Advanced Managerial Accounting
An in-depth study of the role that accounting data plays in the decision making processes of managers of both for-profit and nonprofit entities. Class 3. Prerequisite(s): ACCT 2113 .
|
| |
-
ACCT 4203 - Advanced Accounting
A study of accounting theory as applied to external reporting, business combinations, consolidations, and partnerships. Class 3. Prerequisite(s): ACCT 3113 .
|
| |
-
ACCT 4213 - Advanced Accounting and Consolidations
A study of business combinations and partnerships emphasizing the preparation of consolidated financial statements in accordance with generally accepted accounting principles. Class 3. Prerequisite(s): ACCT 3133.
|
| |
-
ACCT 4223 - Forensic Accounting
This course will provide an overview of occupational fraud and the basic concepts of forensic accounting. The course will focus on detecting occupational fraud, how each type of fraud is committed, and developing and implementing prevention strategies. Class 3. Prerequisite(s): ACCT 3103 .
|
| |
-
ACCT 4233 - Fraud Examination
This course will provide an overview of occupational fraud and the basic concepts of forensic accounting and fraud examination. The course will focus on detecting the most common types of occupational fraud, how each type of fraud is committed, and developing and implementing prevention strategies. Class 3. Prerequisite(s): ACCT 3113 .
|
| |
-
ACCT 4243 - Forensic Accounting and Fraud Examination
This course will provide an overview of occupational fraud and the basic concepts of forensic accounting. The course will focus on detecting occupational fraud, how each type of fraud is committed, and developing and implementing prevention strategies. This course does not meet the Texas State Board of Public Accountancy academic requirements to sit for the CPA exam in Texas. Class 3. Prerequisite(s): ACCT 3123.
|
| |
-
ACCT 4303 - International Accounting
A study of the accounting principles and procedures attendant to the globalization of business with emphasis on the current status of the internationalization of accounting and the impacts that it has on accounting practices in the U. S. Class 3. Prerequisite(s): ACCT 2103 .
|
| |
-
ACCT 4323 - Advanced Financial Accounting Topics
A comprehensive study of advanced financial accounting issues including compensation and pensions, leases, derivatives, foreign currency transactions, revenue recognition, and partnerships. Class 3. Prerequisite(s): ACCT 3103 .
|
| |
-
ACCT 4333 - Intermediate Financial Accounting III
A comprehensive study of advanced financial accounting issues including dilutive securities and earnings per share, investments, revenue recognition, accounting for income taxes, pensions and post-retirement benefits, and leases. Class 3. Prerequisite(s): ACCT 3123.
|
| |
-
ACCT 4403 - Auditing
A study of the theory of auditing, covering audit procedures, professional ethics, auditor’s legal liability, evidence gathering, internal control, and audit reports. Class 3. Prerequisite(s): ACCT 3103 and MATH 1423 .
|
| |
-
ACCT 4413 - Corporate Tax Accounting
Introduction to auditing as it relates to the accounting profession. Course emphasizes generally accepted auditing standards; the acquisition, evaluation and documentation of audit evidences related to internal control, the accounting processes, and the resulting financial statements; professional responsibilities; and auditors’ reports and opinions. Class 3. Prerequisite(s): ACCT 3123 and MATH 1423.
|
| |
-
ACCT 4423 - Accounting Ethics
A study of ethical reasoning and professional responsibility in the accounting profession. Students will study the meaning of integrity, objectivity and independence as defined by the American Institute of CPAs. Class 3. Prerequisite(s): ACCT 3103 .
|
| |
-
ACCT 4443 - Auditing and Assurance Services
Introduction to auditing as it relates to the accounting profession. Course emphasizes generally accepted auditing standards; the acquisition, evaluation and documentation of audit evidences related to internal control, the accounting processes, and the resulting financial statements; professional responsibilities; and auditors’ reports and opinions. Class 3. Prerequisite(s): ACCT 3123 and MATH 1423.
|
| |
-
ACCT 4503 - Accounting Systems
A study of the principles and procedures of accounting systems design and installation, with emphasis on audit technique and audit trail considerations in both manual and computer based systems. Class 3. Prerequisite(s): ACCT 2103 and BUSI 2123 .
|
| |
-
ACCT 4923 - Accounting Internship
Supervised accounting experience in performing duties as an accounting assistant in a local business environment. Career preparation is enhanced through reviews and discussions of current accounting proposals and practices, CPA requirements, and occupational choices. Class 3. Prerequisite(s): Twelve hours of upper level accounting courses and consent of Instructor. (On Demand)
|
| |
-
ACCT 4941-4994 - Special Topics
A one-to-four-credit hour course to be utilized for seminars, special lectures in topics not offered in the catalog, and as a mechanism for developing new courses. Subjects offered under this number may include any area of the field of accounting. This course may be taken more than one time when the topics are different. Class 1-4. Prerequisite(s): consent of instructor.
|
| |
-
AEDP 4003 - Aircraft Dispatch I
A review of key elements from Flight and Air Traffic courses as applied to aircraft dispatch operations. Basic application of dispatch principles are explored. Class 3. Prerequisite(s): AERF 1113 , AERF 2103 , AERO 2203 , AERO 4123 . (Summer)
|
| |
-
AEDP 4013 - Aircraft Dispatch II
A full development and application of appropriate dispatch procedures. Students will be able to correctly schedule and dispatch aircraft in operation. Class 3. Prerequisite(s): AEDP 4003 . (Summer)
|
| |
-
AERF 1113 - Flight Science I (Private Pilot Ground School)
A study of the basics in flight, including aerodynamics, aircraft systems, weight and balance, charts, navigation, flight planning, regulations, and weather. Successful completion of the course completes requirements to take the Federal Aviation Administration Private Pilot Knowledge exam. Class 3.
|
| |
-
AERF 1132 - Primary Flight I (Private Pilot Flight 1)
This course is the first half of the private pilot flight training and includes flight training up through the first solo flight. Training includes 31 hours of flight time. The student MUST have a Pilot Medical Certificate, obtained through an Aviation Medical Examiner, and a Student Pilot Certificate prior to registering for the course. The FAA Private Pilot knowledge exam must be completed prior to beginning this course. Lab 4. Prerequisite(s): AERF 1113 , or consent of department.
|
| |
-
AERF 1142 - Primary Flight II (Private Pilot Flight 2)
This course is the second half of the flight training in preparation for taking the FAA Private Pilot Practical Test. Training includes 40 hours of flight and Aviation Training Device (ATD) time. The FAA Medical and Student Pilot certificate required for AERF 1132 must still be valid. Lab 4. Prerequisite(s): AERF 1132 or AERF 1111 (Former Course). Pre or Corequisite(s): AERO 2203.
|
| |
-
AERF 1201 - Flight Policies and Standardization
This standardization course is required for flight students who obtained a pilot certificate prior to enrolling in LeTourneau University. The course covers LeTourneau Flight policies and procedures including, but not limited to, Flight Operations Handbook, obtaining weather, airplane familiarization, flight logs and required reporting procedures, dispatching procedures, maintenance and inoperative equipment issues, checklists and emergency procedures, flight simulation lab policies, flight facilities, and airport familiarization. This course includes 26 hours of flight time. Emphasis is placed on basic airmanship. The student must demonstrate single engine proficiency to the level of pilot certificate held to successfully complete this course. Lab 2. Prerequisite(s): Private Pilot or higher certificate and approval of Flight Science Department.
|
| |
-
AERF 2103 - Flight Science II (Instrument Ground School)
A study of instrument flight operations, including flight instruments, avionics equipment, instrument navigation, instrument approaches and departures, and regulations pertaining to instrument flight. Successful completion of the course completes requirements to take the Federal Aviation Administration Instrument Airplane knowledge exam. Class 3. Prerequisite(s): Private pilot certificate or AERF 1113 . Pre or Corequisite(s): AERO 2203 .
|
| |
-
AERF 2311 - Commercial Flight I
This course includes the first stage of commercial flight training and the first stage of instrument flight training. The commercial flight training builds solo cross-country experience and aircraft skill with a focus on visual flight reference. The instrument stage introduces basic attitude instrument flight and navigation, including basic G1000 skills. Emphasis is placed on basic airmanship. Includes 46 hours of flight and Aviation Training Device (ATD) time. Lab 2. Prerequisite(s): Private pilot certificate, AERF 1142 or AERF 1201 . Pre or Corequisite(s): AERF 2103 .
|
| |
-
AERF 2421 - Commercial Flight II (Missions Emphasis)
Second stage of commercial flight training for CSEL completing commercial cross-country requirements utilizing tailwheel aircraft and heavy high-performance single engine maneuvers in C206 aircraft. Includes 25 hours of Citabria time and 15 hours of C206 time. Lab 2. Prerequisite(s): AERF 2103 , AERF 3412 , AERF 2311 , Private pilot certificate with instrument rating, and current FAA Medical certificate. Corequisite(s): AERF 3103.
|
| |
-
AERF 3103 - Flight Science III (Commercial Ground School)
A study in advanced flight involving multi-engine aircraft performance, complex aircraft systems, advanced weather, and regulations pertaining to commercial flight operations. Successful completion of the course completes requirements to take the FAA Commercial Pilot knowledge exam. Class 3. Prerequisite(s): Private pilot certificate and AERF 2103 . Pre or Corequisite(s): AERO 2113 .
|
| |
-
AERF 3211 - Upset Recovery Training
This flight course is designed to give pilots the experience and knowledge to immediately recognize aircraft upset situations and the skills to safely and precisely recover from such occurrences. This course will include flight recoveries from nose-high, nose-low, and inverted attitudes; spin entries and recoveries; and basic aerobatic maneuvers. Includes 10 hours of flight time. Lab 1. Prerequisite(s): Private Pilot certificate and a tail wheel endorsement.
|
| |
-
AERF 3411 - Commercial Flight II - Multi-Engine Operations
Second stage of commercial flight training concentrating on multi-engine aircraft. Includes 41 hours of flight and Aviation Training Devices (ATD) time. At the successful conclusion of this course, the student is recommended to take the FAA Commercial Multi-Engine Practical Test. Lab 2. Prerequisite(s): AERF 2103 , AERF 2311 , AERF 3412 and Private pilot certificate with instrument rating. Corequisite(s): AERF 3103 .
|
| |
-
AERF 3412 - Instrument Flight
Flight training in preparation for the Instrument Rating in single engine land aircraft. Includes 49 hours of flight and Aviation Training Device (ATD). Successful completion of this course includes the FAA Instrument Rating for single engine airplane. Lab 6. Prerequisite(s): AERF 2103 and Private Pilot Certificate.
|
| |
-
AERF 3512 - Commercial Flight III - Multi-Engine Operations
Third stage of commercial flight training tailored for students who are pursuing a professional pilot career with a concentration on commercial operation of multi-engine aircraft and advanced navigation. Single engine and multi-engine aircraft are utilized. Includes 34 hours of flight and Aviation Training Device (ATD) time. Successful completion of this course includes an endorsement for the FAA Commercial Pilot, Airplane Single Engine Practical Test. Lab 6. Prerequisite(s): Private pilot certificate with Instrument Rating for single engine land aircraft, Commercial Pilot certificate with Instrument Rating for multi-engine land aircraft, AERF 3103 , and AERF 3411 .
|
| |
-
AERF 3522 - Commercial Flight III - Mission Emphasis
Third Stage of commercial flight training course concentrates on single engine operations and on commercial maneuvers in preparation for the FAA Commercial Plot, Airplane Single Engine Practical Test. Includes 46 hours of flight and Aviation Training Device (ATD) time. Successful completion of this course includes an endorsement for the FAA Commercial Pilot, Airplane Single Engine Practical Test. Lab 6. Prerequisite(s): Private pilot certificate with Instrument Rating for single engine land aircraft, Commercial pilot certificate with Instrument Rating for multi-engine land aircraft, and AERF 3411 .
|
| |
-
AERF 4101 - Commercial Multiengine Add-On
This course provides the flight and ground training to add the multi-engine rating to the commercial single engine certificate. It consists of 24 hours of flight and Aviation Training Device (ATD). Lab 2. Prerequisite(s): Commercial Pilot certificate with Instrument Rating for airplane single engine land.
|
| |
-
AERF 4201 - High Performance Flight
This course provides flight and ground training to add the high-performance endorsement to a pilot certificate. Includes 3 hours of flight time in a high performance aircraft. Lab 1. Prerequisite(s): Private Pilot or higher certificate, AERF 3411 , and AERF 3412 .
|
| |
-
AERF 4601 - Flight Instructor Single Engine Flight Add-On
This course provides the flight and ground training necessary to add the Single Engine Airplane to the Flight Instructor Multi-engine Certificate (MEI). Includes 14 hours of flight and Aviation Training Device (ATD) time. Lab 3. Prerequisite(s): Flight Instructor Certificate for Multi-engine airplanes (MEI).
|
| |
-
AERF 4602 - Flight Instructor Initial Flight MEI
This course provides flight training required for the Flight Instructor, Multi-engine Certificate (MEI). Additional Flight Instructor Ratings that can be added to this certificate are the Single Engine Airplane (AERF 4601 ) and Instrument Instructor (AERF 4611 ). Includes 35 hours of and Aviation Training Device (ATD) time. Lab 3. Prerequisite(s): AERF 4603 , Commercial Pilot, Multi-Engine Certificate with Instrument Rating.
|
| |
-
AERF 4603 - Flight Instructor Theory
A study in the fundamentals of instructing, flight maneuvers, and Federal Aviation regulations pertaining to a flight instructor. A person successfully completing the course may take these FAA Knowledge exams: Flight Instructor Airplane (FIA), Instrument Flight Instructor (FII), Fundamentals of Instructing (FOI), Instrument Ground Instructor (IGI), and Advanced Ground Instructor (AGI). Class 3. Pre or Corequisite(s): AERF 3512 or AERF 3522 .
|
| |
-
AERF 4611 - Flight Instructor Instrument Flight Add-On
This course provides the flight and ground training necessary to add the Flight Instructor Instrument Rating to a Flight Instructor Certificate. Includes 14 hours of flight and Aviation Training Device (ATD) time. Lab 3. Pre or Corequisite(s): AERF 4601 or AERF 4632 , and Flight Instructor Certificate.
|
| |
-
AERF 4631 - Flight Instructor Multi-Engine Flight Add-on
This course provides the flight and ground training necessary to add the Multi-Engine Flight Instructor Certificate to the Single Engine Flight Instructor Certificate. Includes 25 hours of flight and Aviation Training Device (ATD) time. The FAA requires a minimum of 15 hours multi-engine pilot-in-commend time to take the FAA Practical Test. Lab 3. Prerequisite(s): Flight Instructor Single Engine Certificate and Commercial Pilot, Airplane Multi-Engine Certificate.
|
| |
-
AERF 4632 - Flight Instructor Initial Flight Single Engine
This course provides flight training required for the initial Flight Instructor Certificate in the single engine aircraft. Additional Flight Instructor ratings that can be added to this certificate are the Instrument Instructor Add-On (AERF 4611), and Flight Instructor Multi-engine Add-On, (AERF 4631). Includes 39 hours of flight and Aviation Training Device (ATD) time. Lab 3. Prerequisite(s): AERF 4603 , a Commercial Pilot, Airplane Single Engine Certificate with Instrument Rating.
|
| |
-
AERF 4901-4994 - Special Topics
Seminars, special lectures and flight training which are not offered on a regular basis. This course may be utilized for the classroom, flight training, or lab credit. Lab credit will be issued for projects requiring a high level of practical application. This course may be taken more than one time if different topics are studied. Class 0-4. Lab 0-4. Prerequisite(s): Consent of instructor.
|
| |
-
AERO 1011 - Mission Aviation Vision Trip
A short (2-3 weeks) international field experience with a mission organization, designed to provide the student with a realistic picture of mission aviation. This vision trip must be completed with an established mission aviation organization under the supervision of a full time missionary aviator. Evaluation will be based on the supervisor’s appraisal of student performance and LeTourneau University faculty evaluation of written assignments. Departmental approval is required and student must have completed one semester at LeTourneau University. This trip should be completed between the freshman and sophomore year and must be completed prior to reaching junior status. Class 1.
|
| |
-
AERO 2113 - Aerodynamics For Pilots
An in-depth study of low and high-speed aerodynamics related to piloting aircraft. Class 3. Prerequisite(s): AERF 1113 .
|
| |
-
AERO 2203 - Aviation Meteorology
A study of meteorology as it relates to pilots, covering low and high-altitude weather, weather forecasting, in-flight weather observations, and decision making. Class 3. Prerequisite(s): AERF 1113 .
|
| |
-
AERO 2823 - Aviation Management
An introduction to the principles of aviation management. Topics include management functions, organization, flight and maintenance operations, and safety and liability. Class 3. Prerequisite(s): AVTC 1003 . (Distance Learning)
|
| |
-
AERO 3153 - Aviation Safety Factors
A comprehensive view of safety programs in aviation business. Study includes safety program organizations, accident investigation, accident and incident reporting, and modifying organizational behavior toward the goal of embracing a culture of safety. Class 3. (Distance Learning)
|
| |
-
AERO 3213 - Electronic Navigation And Flight Control Systems
A study of flight deck technology typically found on modern transport aircraft. This course explores the knowledge required for operation and management of autopilots, auto-throttles, electronic flight instrument systems, and flight management systems. Class 3. Prerequisite(s): AERF 2103 . (Spring)
|
| |
-
AERO 3423 - Aviation Human Factors
An introduction to the relationship between human and machine. Develops an understanding of the need to optimize design to allow for better human-machine interaction in aviation. Introduces the student to the psychological and physiological limitations of humans in complex operating environments. Class 3. Prerequisite(s): AVTC 1003 and ENGL 1023 . (Spring)
|
| |
-
AERO 4123 - Commercial Flight Operations
A study of commercial flight operations governed by 14 CFR Part 121 and 135 including regulations, economic issues, corporate culture, and international issues. Operational topics include flight operations, employment policies, domiciles, operating specifications, type of services provided, training, passenger considerations, decision making, and communications. Class 3. Prerequisite(s): AERF 2103 . (Spring)
|
| |
-
AERO 4133 - Crew Resource Management
An in-depth study of Crew Resource Management which involves having a complete understanding of the flight deck environment and the proper utilization of all resources available to an aviator. This course gives the student a thorough indoctrination to CRM, including areas of leadership, communications, and management as they apply to the modern air transport pilot. Class 3. Prerequisite(s): AERF 3103 . (Fall)
|
| |
-
AERO 4163 - Aviation Law
Covers the scope of all regulations concerning domestic and international aviation (traffic rules, agencies, operation, aircraft, and people) in accordance with international, federal, state, and local agencies. Includes case histories, liens, security interest in aircraft, international conferences, bilateral and multilateral agreements, and criminal statutes. Case studies and assignments will include domestic and international scenarios. Class 3. Prerequisite(s): AERO 2823 . (Distance Learning)
|
| |
-
AERO 4423 - Safety Classification and Cause Analysis Systems
A study of safety classification systems and root cause analysis tools used by safety professionals to identify and resolve safety issues. Students will explore several different classification systems with an emphasis on applying the Human Factors Analysis and Classification System (HFACS). Emphasis is placed on application of classification systems to Safety Management and Reliability Management. Class 3. Prerequisite(s): AERO 3153 , AERO 3423 .
|
| |
-
AERO 4513 - Airport Operations and Management
A study of airport operations and management. Students will be introduced to the responsibilities of the airport manager as well as the rules and regulations governing airport operations. Class 3. Prerequisite(s): AERO 2823 . (Distance Learning)
|
| |
-
AERO 4613 - Aviation Safety Management Systems
A study of the theory and practice of Aviation Safety Management Systems (SMS). The students will examine theory of SMS, International Civil Aviation Organization (ICAO) recommendations, and FAA regulations as they relate to safety systems. Emphasis is placed on application of SMS guidelines and best practices. Prerequisite(s): AERO 3153 , AERO 3423 . (Distance Learning)
|
| |
-
AERO 4823 - Aviation Management Capstone
This course is the capstone experience for aviation management and aviation studies students. Students will draw on skills learned in their major courses to demonstrate their ability to evaluate aviation management scenarios using case studies. The class will also discuss strategies regarding the integration of faith in their work in the field of aviation. Class 3. Prerequisite(s): AERO 3423 , AERO 2823 , AERO 3153 , AERO 4163 and FINC 2743 . (Distance Learning)
|
| |
-
AERO 4901-4994 - Special Topics
Seminars, special lectures and flight training which are not offered on a regular basis. This course may be utilized for the classroom, flight training, or lab credit. Lab credit will be issued for projects requiring a high level of practical application. Credit from this course is not applicable to basic FAA requirements. This course may be taken more than one time if different topics are studied. Class 0-4. Lab 0-4. Prerequisite(s): Consent of instructor.
|
| |
-
AERO 6233 - Aviation Safety Management Systems
A study of the theory and practice of Aviation Safety Management Systems (SMS). The
students will examine theory of SMS, International Civil Aviation Organization (ICAO)
recommendations, and FAA regulations as they relate to safety systems. Emphasis is placed on
application of SMS guidelines and best practices. Class 3.
|
| |
-
AERO 6243 - Aerospace Regulatory Issues
An in depth investigation of the Federal Aviation Regulations, space operations regulations, and
legal issues unique to the aerospace industry. Both FAA and ICAO regulations and procedures
will be discussed. Legal issues such as liability will be covered. Class 3.
|
| |
-
AERO 6403 - Airport Operations and Management
Students will be introduced to the responsibilities of the airport manager as well as the rules and
regulations governing airport operations. Both the operations of an airport and the operation of a
Fixed Base Operator (FBO) will be included. Issues such as the process of creating or
expanding an airport will be covered. Class 3.
|
| |
-
AERO 6653 - Safety Classification and Cause Analysis Systems
A study of safety classification systems and root cause analysis tools used by safety
professionals to identify and resolve safety issues. Students will explore several different
classification systems with an emphasis on applying the Human Factors Analysis and
Classification System (HFACS). Emphasis is placed on application of classification systems to
Safety Management and Reliability Management. Class 3.
|
| |
-
ARPA 2011 - Introduction to Remotely Piloted Aircraft Systems Lab
Practical introduction to RPA utilizing small UAS simulators and hobby RC aircraft. Designed to build student operational skill and knowledge. Lab 2. Corequisite(s): ARPA 2012 Summer only
|
| |
-
ARPA 2012 - Introduction to Remotely Piloted Aircraft Systems
Overview of RPA History, Applications, and Operations, including current RPAS law/regulations . Class 2. Corequisite(s): ARPA 2011 . Summer only
|
| |
-
ARPA 2121 - Remotely Piloted Aircraft Operation Lab
Focuses on the practical knowledge and skills needed to configure and operate small RPAVs, including the airframe, powerplant, communication technology, control systems, navigation, and sensor packages by working with actual RPA. Lab 2. Corequisite(s): ARPA 2123 Summer only
|
| |
-
ARPA 2123 - Remotely Piloted Aircraft Operation
Discussion of the basic configuration of small RPA including airframe, powerplant, communication technology, control systems, navigation, and sensor packages. Class 3. Prerequisite(s): ARPA 2012 , AVTC 2003 or AVTC 2232 . Corequisite(s): AERF 1113 , ARPA 2121 , AVTC 1003 . Summer only
|
| |
-
ARPA 3121 - Remotely Piloted Aircraft Flight Control Systems Lab
Focuses on the practical knowledge and skills needed to configure and operate small autonomous RPA systems, including the autonomous controls and sensors as they relate to specific platforms and missions. Lab 2. Corequisite(s): ARPA 3123 Summer only
|
| |
-
ARPA 3123 - Remotely Piloted Aircraft Flight Control Systems
Indepth discussion covering autonomous RPA flight control, air data sensors, GPS navigation, internal reference systems as they relate to specific platforms and missions. Class 3. Prerequisite(s): ARPA 2123 Corequisite(s): ARPA 3121 Summer only
|
| |
-
ARPA 4121 - Advanced Remotely Piloted Aircraft Systems Operation Lab
A capstone practical experience in planning, preparing for, implementing, and analyzing data from various complex RPA missions. Lab 2. Corequisite(s): ARPA 4123 The class and lab will be offered only as an elective and as an independent study. It would be done as an online simulation with the Textron Systems and Unmanned Safety Institute. The LeTourneau University instructor would serve as a mentor.
|
| |
-
ARPA 4123 - Advanced Remotely Piloted Aircraft Systems Operation
RPA Capstone course includes planning and execution of complex RPAV missions - includes SUAS flight experience. Class 3. Prerequisite(s): AERF 3103 , AERO 3213 Pre or Corequisite(s): AERO 4133 , ARPA 4121 The class and lab will be offered only as an elective and as an independent study. It would be done as an online simulation with the Textron Systems and Unmanned Safety Institute. The LeTourneau University instructor would serve as a mentor.
|
| |
-
AVTC 1001 - Foundational Concepts Of Aviation Studies Laboratory
This lab provides a practical introduction to the aviation industry: Lab safety, aircraft systems familiarization, aircraft operations, technical publications, tool familiarization, aircraft hardware identification and installation, and precision measurements. Lab 4. Corequisite(s): AVTC 1003 .
|
| |
-
AVTC 1003 - Foundational Concepts Of Aviation Studies
This course is an overview of the aviation profession and the vehicles used for powered flight. Topics include attributes of an aviation professional, airman qualifications privileges and limitations, career opportunities, ethics, technical publications, weight and balance from the technician’s perspective, aircraft configuration, and operational capabilities. A study of the early history of powered flight is also included. Class 3.
|
| |
-
AVTC 1401 - Aircraft DC Electricity Laboratory
This lab covers experimental practice exercises in the wiring of DC electrical circuits including series, parallel, series parallel, and complex circuits. Emphasis is placed on schematic diagram interpretation, multi meter use, basic soldering, and circuit fault isolation. Lab 2. Corequisite(s): AVTC 1403 .
|
| |
-
AVTC 1403 - Aircraft DC Electricity
This course covers principles of electricity, direct current circuits, electrical units, Ohm’s law, Kirchhoff’s voltage and current laws, and solutions to complex circuits using Thevenin’s theorem and loop equations. Inductance, capacitance, magnetism, electromagnetism, induction, troubleshooting principles, and AC are also introduced. Class 3. Corequisite(s): AVTC 1401 and one of the following: MATH 1203 , MATH 1503 , MATH 1603 , or MATH 1903 .
|
| |
-
AVTC 2003 - Aircraft Systems for Pilots
An overview of airframe systems such as aircraft electrical systems, fuel systems, cabin atmosphere control systems, instrument systems, communication and navigation systems, ice and rain control systems, fire protection systems, and aircraft inspection requirements. Class 3. Prerequisite(s): AVTC 1003 .
|
| |
-
AVTC 2013 - Powerplant Systems for Pilots
An overview of the theory, principles of operation, and control of reciprocating and turbine powerplants and related systems. Class 3. Prerequisite(s): AVTC 1003 .
|
| |
-
AVTC 2201 - Aviation Maintenance for Pilots Lab
This lab teaches students basic airplane system maintenance and troubleshooting for pilots as allowed by the FAA. This lab does not meet FAA requirements for mechanic certification and is not approved under 14 CFR Part 147. Lab 1. Corequisite(s): AVTC 2232 .
|
| |
-
AVTC 2211 - Aircraft Metal Structures Laboratory
This lab covers practical application of repairs to aluminum aircraft structural components. Lab 5. Corequisite(s): AVTC 2213 .
|
| |
-
AVTC 2213 - Aircraft Metal Structures
This course covers the study of materials, methods, and procedures used in the construction and repair of aircraft structures. Emphasis is placed on stress in various aircraft structural designs and on corrosion theory, identification, and control. Class 3. Prerequisite(s): AVTC 1003 , AVTC 1403 . Corequisite(s): AVTC 2211 .
|
| |
-
AVTC 2231 - Introduction To Aircraft Systems Laboratory
This lab covers practical applications involving the disassembly, inspection, and maintenance of various aircraft system components, including hydraulic and pneumatic systems, landing gear and brake systems, fire warning and control systems, and environmental control systems as used in General Aviation aircraft. Lab 4. Corequisite(s): AVTC 2232 .
|
| |
-
AVTC 2232 - Introduction To Aircraft Systems
This course is a study of the theory, components, and operation of various aircraft systems used in General Aviation aircraft including hydraulic systems, landing gear and brake systems, pneumatic systems, fire warning and control systems, and environmental control systems. Class 2. Prerequisite(s): AVTC 1003 , AVTC 1401 , AVTC 1403 , and one of the following: MATH 1203 , MATH 1503 , MATH 1603 , or MATH 1903 . Corequisite(s): AVTC 2231 .
|
| |
-
AVTC 2301 - Aviation Maintenance for Pilots Lab (Non-147)
This lab teaches students basic airplane system maintenance and troubleshooting for pilots as allowed by the FAA. This lab does not meet FAA requirements for mechanic certification and is not approved under 14 CFR Part 147. Students seeking Airframe and Powerplant Mechanic certification must take AVTC 2231 . Lab 1. Corequisite(s): AVTC 2232.
|
| |
-
AVTC 2431 - Powerplant Electrical Systems Laboratory
This lab is a practical application of electricity involving the overhaul, testing, and installation of aircraft magnetos, generators, starters, voltage regulators, and battery servicing. Lab 5. Corequisite(s): AVTC 2453 , AVTC 2611 , and AVTC 2613.
|
| |
Page: 1
| 2
| 3
| 4
| 5
| 6
| 7
| 8
| 9
| 10
| 11
… Forward 10 -> 12 |
Print this Page